BDRMZ - SPEC QQ-S-571, FLOWSOLDER ALLOYS
- MSDS: BDRMZ
- Manufacturer: FEDERATED FRY METALS
- Product Name: SPEC QQ-S-571, FLOWSOLDER ALLOYS
- National Stock Number: 3439-00-269-9610
Product Identification
Product ID:SPEC QQ-S-571, FLOWSOLDER ALLOYS
MSDS Date:01/01/1987
FSC:3439
NIIN:00-269-9610
MSDS Number: BDRMZ
Responsible Party
Emergency Phone: (314) 946-1611
Cage: 65172
Contractor
Telephone: 814-946-1611
Cage: 65172
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 61.5%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 37.5%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ANTIMONY (SARA III)
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 0.5%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG SB/M3; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
BISMUTH
CAS: 7440-69-9
RTECS: EB2600000
Fraction By Weight: 0.25%
_ __
Fraction By Weight: _
Hazards
Effects of Overexposure:EYE, NASAL SEPTAL ULCERATION, STOMACH LINING,
NOSE & BRONCHIAL TRACTS IRRITATION, KIDNEY, NAUSEA.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SKIN: WASH THOROUGHLY
W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING. INGESTION: INDUCE
VOMITING IF PERSON IS CONSCIOUS. GET MEDICAL ATTENTION. INHALATION:
REMOVE TO FRESH AIR. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:NOT FLAMMABLE
Fire Fighting Procedures:WEAR SCBA IN CASE OF POISONOUS LEAD FUMES.
Accidental Release
Spill Release Procedures:ALLOW TO SOLIDIFY AND COLLECT IN SEALED DRUMS
FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN DRY CONDITIONS. NO FOOD OR
DRINK SHOULD BE ALLOWED IN AREAS WHERE THESE PRODUCTS ARE ED. WASH
THOROUGHLY AFTER HANDLING BEFORE EATING.
Exposure Controls
Respiratory Protection:USE FUME MASK ONLY REQUIRED IF TLV'S EXCEEDED.
Ventilation:PROVIDE MECHANICAL VENTILATION TO KEEP BELOW TLV
Protective Gloves:NOT NEEDED
Eye Protection:WEAR SAFETY GLASSES
Supplemental Safety and Health
MSDS DATE: 1/9/87
Chemical Properties
HCC:N1
Spec Gravity:N//R
Solubility in Water:NIL
Appearance and Odor:SILVER TO GRAY METAL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, REDUCING AGENTS, HALOGENS, OXIDIZERS
Stability Condition to Avoid:TIN, LEAD, ANTIMONY, SILVER, BISMUTH
ALLOYS
Hazardous Decomposition Products:LEAD FUMES AT HIGH TEMPERATURES
(>750F)
Disposal
Waste Disposal Methods:RETURN TO SUPPLIER FOR REPROCESSING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.